How do i use my dolphin pool cleaner?

4
Emil Littel asked a question: How do i use my dolphin pool cleaner?
Asked By: Emil Littel
Date created: Tue, May 25, 2021 12:01 PM
Date updated: Mon, Aug 8, 2022 3:43 AM

Content

Top best answers to the question «How do i use my dolphin pool cleaner»

The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly sitting on the floor of the pool. Turn it ON and let it get the job done. Unwind the floating cable and stretch it out completely so that it has no kinks.

FAQ

Those who are looking for an answer to the question «How do i use my dolphin pool cleaner?» often ask the following questions:

🌴 How to remove dolphin pool cleaner from pool?

Dolphin swimming pool cleaners require to have to be attached to the power supply which is then connected to an electric outlet. Be sure to have pushed the switch button power unit so that electricity can flow. When the power unit is alluding that it’s on, then look at the connection between the power unit and also the pool cleaner is utterly ...

🌴 How does dolphin pool cleaner work?

Dolphin pool vacuums are much more efficient and sustainable over pressure and suction pool cleaners because they use less power and resources to run, which saves you money. With Dolphin, you can choose the customizable cleaning program that works around your schedule, which saves you time and quickly cleans your pool within two hours.

🌴 How to empty dolphin pool cleaner?

To remove the Dolphin Cleaner, pull the Pool Cleaner to the pool's edge, grab the handle, turn the Cleaner 90 degrees, and pull the Cleaner up out of the water. Do not pull the Pool Cleaner up by its power cord. Step 19 Rest the Dolphin Cleaner on its side to let the water drain out.

3 other answers

To retrieve the Dolphin Pool Cleaner, TURN OFF THE POWER and slowly pull the Cleaner up to the surface with the power cord. 18. To remove the Dolphin Cleaner, pull the Pool Cleaner to the pool's edge, grab the handle, turn the Cleaner 90 degrees, and pull the Cleaner up out of the water. Do not pull the Pool Cleaner up by its power cord.

Cleaning a Dolphin Robotic Pool Cleaner Filter - YouTube. Five Foods | Jesse. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback doesn't begin shortly, try restarting your ...

Maytronics has made it as simple as possible to enhance your residential or commercial swimming pool experience, since all you typically need to do is: Pull the filter out, rinse it clean with a hose, let it air dry and reseat it. Answers to Dolphin user questions about filters follow.

Your Answer

We've handpicked 22 related questions for you, similar to «How do i use my dolphin pool cleaner?» so you can surely find the answer!

How to turn on dolphin pool cleaner?

TURN POWER ON - Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.

Is a dolphin pool cleaner worth it?

It's packed with smart tech features and can clean an in-ground pool up to 50 feet within 3 hours. While you'll get what you pay for with most appliances, with the Dolphin Premier, it doesn't come with any extra accessories. For the premium price, that's disappointing. But it might be worth it in the long run.

What is a dolphin robot pool cleaner?
  • Dolphin robots move freely around the pool and remove debris from the water while scrubbing the pool floor, walls and waterline with an advanced pool brushing system. Total cleaning and optimized water filtration, with gyroscopic navigation system for full cleaning coverage.
What is the best dolphin pool cleaner?
  • 5 Best Dolphin Pool Cleaners – Reviews 2019 1. Dolphin Premier Robotic Pool Cleaner – Top Pick 2. Dolphin Nautilus CC Plus Automatic Pool Cleaner – Best for the Money 3. Dolphin Oasis Z5i Pool Cleaner 4. Dolphin Escape Pool Vacuum – Best for Above-Ground Pools 5. Dolphin Nautilus Pool Vac
What is the latest dolphin pool cleaner?

With the new Quantum, Dolphin introduces a new 400 square inch cartridge with the highest capacity ever recorded on a pool robot. The new Dolphin SnapLoc Filters make robot cleaning easier than ever. All four sides of the Quantum filter simply snap apart for quick and easy cleaning.

What is the newest dolphin pool cleaner?

The latest in the Dolphin series is the Dolphin Premier. The new Premier is described by many as “the best Dolphin robotic pool cleaner ever made”. A quick look at its many features and broad cleaning capability shows why the Dolphin Premier really is in a class of its own.

Why is my dolphin pool cleaner floating?

When a Dolphin wants to float it is usually due to trapped air in the cleaner or the pool's chemicals are out of balance – either the pH or salinity. Refer to your owner's manual for appropriate ranges. If your model has a filter bag, turn the Dolphin upside down in the water.

Can a dolphin pool cleaner be used in a fiberglass pool?
  • Yes, the Dolphin is suitable to use in fiberglass or Vinyl pool surfaces. Can I purchase a Dolphin pool cleaner and use it abroad? Dolphin pool cleaners purchased in the United States must be operated in North America in order to retain the warranty rights.
Can a dolphin escape from a pool cleaner?
  • A. Ergonomic Dolphin commercial and backyard pool cleaners equipped with PowerStream mobility drive systems have an escape feature programmed right in, which tells them when they’re stuck. That gives them the power needed to navigate sticky situations. Whichever model you have, it’s helpful to know that: High VGB main drains can derail Dolphins.
How do i connect my dolphin pool cleaner?

How a Dolphin Pool Cleaner Works. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback doesn't begin shortly, try restarting your device. Up next in 8.

How do you reset a dolphin pool cleaner?

With your Dolphin in use, press the “Reset” button. Hold the “Reset” button down for about 3-5 seconds. Check the Full Filter Light indicator, ensuring that it's off. In essence, what you've just done is “zero” out the sensor.

How do you service a dolphin pool cleaner?
  1. Open the filter covers and remove the cartridges from both sides of the robot.
  2. Open the clips and remove the filters.
  3. Clean the filters with a hose.
  4. Reassembling the filter elements:
How do you use a dolphin pool cleaner?
  • PLACE CLEANER INTO POOL - Place the Dolphin Cleaner into the pool and rotate it from side to side to release trapped air. RELEASE CLEANER - Let the Cleaner drift to the bottom of the pool. TURN POWER ON - Press the ON/OFF switch on the Power Supply.
How does a dolphin dx3 pool cleaner work?
  • The DX3 has an internal filter bag which collects dirt, debris and dust. Access to the filter bag is gained through the bottom of the pool cleaner. Remove the bag regularly and rinse it with a garden hose. It can also be washed in a washing machine or rinsed with a water and bleach solution to kill all the algae spores.
How does a dolphin robotic pool cleaner work?

All you need to do is to place the Dolphin in your pool and turn it on. The computer in the cleaner learns the dimensions of your pool and then programs itself to efficiently vacuum every inch of the pool. The debris and any dirt are brushed into a self contained vacuum bag.

How does the dolphin advantage pool cleaner work?
  • The Dolphin Advantage has a large filter basket that clicks into place. This filter type is easier to remove and clean when compared to a filter bag system. Moreover, the dirt goes into the pool robot’s filter basket instead of ending up in the pool pump’s filter.
How does the dolphin nautilus pool cleaner work?
  • CLEAN WALLS - When the Dolphin Nautilus Pool Cleaner comes to a wall, it will square up to the wall and climb it to the surface. At the surface it will move sideways cleaning the waterline and then drop back to the bottom to resume cleaning the pool floor.
How does the dolphin t45 pool cleaner work?

Well, there are no batteries in Dolphin cleaners at all... Their "scanning" is not really what you think... it does not remember your pool.. Every time you turn it off and back on, it has to rescan the pool again. No matter how is works, it works well for me!!! Thanks, Jim R.

How long does the dolphin pool cleaner run?

The Maytronics Dolphin Nautilus Robotic Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 3 hours.

How long is a dolphin pool cleaner cycle?

Nautlius PLUS - Maytronics US, Inc. The regular nautilus cycle time is 3 hrs. Click to expand... This says 3 Hours > Amazon.com : Dolphin 99996403-PC Dolphin Nautilus Plus Robotic Pool Cleaner : Patio, Lawn Garden. (you have to scroll to the bottom to see the side by side for the 2 models) Hmmm.

How to replace cord on dolphin pool cleaner?

Step 1. ORDER PARTS - You have two options to select from for replacing your 18M (60') cable. Both have the solid, DIY, plug but one has a metal spring, 9995872-DIY and the other has a rubber spring, 9995873-DIY. Buy the one that matches your current cable.

How to retrieve a maytronics dolphin pool cleaner?
  • RETRIEVE CLEANER - To retrieve the Dolphin Pool Cleaner, make sure the power is off and slowly pull the Cleaner up to the surface with the Power Cord. REMOVE CLEANER - Pull the Cleaner to the pool's edge, grab the handles, turn the Cleaner 90 degrees, and pull the Cleaner up out of the water.